# Update endpoint url after adding Xano custom domain **URL:** \ **Category:** How do I?\ **Created:** [April 28, 2023, 12:21am UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507 "2023-04-28T00:21:28Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![MichaelLovell](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/michaellovell/32/2157_2.png) [@MichaelLovell](https://community.weweb.io/u/MichaelLovell)\ **Post date:** [April 28, 2023, 12:21am UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/1 "2023-04-28T00:21:28Z")
After adding a custom domain in Xano, how can I refresh the Xano configuration to use the new url without breaking all of my connections? At the moment it continues to use the original xano url. ![image](https://us1.discourse-cdn.com/flex016/uploads/weweb/original/2X/8/81e78468177136f12802ecf1cc111b2ea88ac8c1.png) ---
**Author:** ![Dorian](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/dorian/32/13183_2.png) [@Dorian](https://community.weweb.io/u/Dorian)\ **Post date:** [August 1, 2023, 8:53pm UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/2 "2023-08-01T20:53:16Z")
@MichaelLovell Did you figure this out? I just upgraded Xano from Build to Launch and need to update the Xano API URL origin per below: ![image](https://us1.discourse-cdn.com/flex016/uploads/weweb/original/2X/1/10c9f2ba3436e590799f463b365d270640713a53.png) ---
**Author:** ![MichaelLovell](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/michaellovell/32/2157_2.png) [@MichaelLovell](https://community.weweb.io/u/MichaelLovell)\ **Post date:** [August 1, 2023, 9:13pm UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/3 "2023-08-01T21:13:07Z")
Unfortunately, no. When I made the same transition from Build to Launch, and added a custom domain, I had to go through and reconfigure my endpoints. ---
**Author:** ![Dorian](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/dorian/32/13183_2.png) [@Dorian](https://community.weweb.io/u/Dorian)\ **Post date:** [August 1, 2023, 9:17pm UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/4 "2023-08-01T21:17:34Z")
@MichaelLovell As in re-add every endpoint and recreate every collection? ---
**Author:** ![MichaelLovell](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/michaellovell/32/2157_2.png) [@MichaelLovell](https://community.weweb.io/u/MichaelLovell)\ **Post date:** [August 1, 2023, 9:28pm UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/5 "2023-08-01T21:28:50Z")
Sorry, but to be honest, I can’t remember precisely what stayed connected and what broke. They didn’t disappear, but required some reconfiguring. It certainly caused me a bit of pain (and was an unexpected surprise). I think I submitted feedback/ticket on it. If it happens to everyone there certainly needs to be greater awareness that the longer you continue to build on free plan in Xano it may have consequences on the frontend due to a new instance being created and therefore the configurations changing. ---
**Author:** ![Dorian](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/dorian/32/13183_2.png) [@Dorian](https://community.weweb.io/u/Dorian)\ **Post date:** [August 1, 2023, 9:36pm UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/6 "2023-08-01T21:36:25Z")
Thanks @MichaelLovell. Can anyone from WeWeb comment on what is required here please? @Quentin or @Alexis perhaps? ---
**Author:** ![raelyn](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/raelyn/32/2803_2.png) [@raelyn](https://community.weweb.io/u/raelyn)\ **Post date:** [August 1, 2023, 11:28pm UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/7 "2023-08-01T23:28:41Z")
Hey! I had the same problem, there is no solution you just gotta go in and change all the URLs… this time round I’m smarter and saved my Xano base URL as a variable in case and use that, in case it changes in the future 🤭 ---
**Author:** ![MichaelLovell](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/michaellovell/32/2157_2.png) [@MichaelLovell](https://community.weweb.io/u/MichaelLovell)\ **Post date:** [August 1, 2023, 11:44pm UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/8 "2023-08-01T23:44:19Z")
@raelyn how did you use a variable for the base url when using the Xano plugin? I saw how @Joyce did the base url when using REST API, but couldn’t see it working with the Xano plugin. Did I miss something? ---
**Author:** ![raelyn](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/raelyn/32/2803_2.png) [@raelyn](https://community.weweb.io/u/raelyn)\ **Post date:** [August 2, 2023, 1:00am UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/9 "2023-08-02T01:00:26Z")
My apologies I’m using the Rest API plug-in 😁 ---
**Author:** ![Dorian](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/dorian/32/13183_2.png) [@Dorian](https://community.weweb.io/u/Dorian)\ **Post date:** [August 2, 2023, 3:53am UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/10 "2023-08-02T03:53:36Z")
Well this sort of sucks. Hopefully WeWeb can address this at some point. In the meantime, is this a two-step process @MichaelLovell? It seems that I have to: 1. Change the configuration in the Xano and Xano Auth plugins to point to my new Xano instance; and 2. Update every API endpoint URL? ---
**Author:** ![MichaelLovell](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/michaellovell/32/2157_2.png) [@MichaelLovell](https://community.weweb.io/u/MichaelLovell)\ **Post date:** [August 2, 2023, 4:21am UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/11 "2023-08-02T04:21:22Z")
@Dorian I think it’s the only choice. In my case, I just bit the bullet and did it. That said, I’m still fixing endpoints in workflows where the configuration broke and I get a Xano error along the lines of ‘This workspace no longer exists’. BUT - if there is a safer way I would wait for @Quentin or @Alexis to provide confirmation. **To clarify** - my experience was it wasn’t just the url that needed updating. It lost what endpoint the request was pointing to and therefore all of the input values. ![image](https://us1.discourse-cdn.com/flex016/uploads/weweb/original/2X/9/9c2ca047fed3ff3c741e59f874b1b383567ce46d.png) Unfortunately, I feel like it’s the price we pay for trying to get as far as we can possible on free plans. There is always a limitation. My only recommendation would be to go through your endpoint configurations in Weweb and take a lot of screenshots or document them so you can troubleshoot them faster (I didn’t do this.) ---
**Author:** ![Dorian](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/dorian/32/13183_2.png) [@Dorian](https://community.weweb.io/u/Dorian)\ **Post date:** [August 2, 2023, 4:35am UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/12 "2023-08-02T04:35:15Z")
Thanks @MichaelLovell. I’ll wait and see what the WeWeb folks say before making any changes. ---
**Author:** ![Alexis](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/alexis/32/13248_2.png) [@Alexis](https://community.weweb.io/u/Alexis)\ **Post date:** [August 2, 2023, 9:37am UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/13 "2023-08-02T09:37:51Z")
Hi! Yes its a big issue, we fixed it on the new version. We plan to release it next week! The new release will allow you to configure a custom domain manually. Also, you may still have to select again your instance in your plugin configuration when your domain change (after a Xano Plan upgrade), but it will be the only action required and your collections/actions will use the new domain automatically 🙂 ---
**Author:** ![Dorian](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/dorian/32/13183_2.png) [@Dorian](https://community.weweb.io/u/Dorian)\ **Post date:** [August 2, 2023, 2:52pm UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/14 "2023-08-02T14:52:47Z")
Amazing thanks @Alexis. I will wait for the new release then! ---
**Author:** ![Dorian](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/dorian/32/13183_2.png) [@Dorian](https://community.weweb.io/u/Dorian)\ **Post date:** [August 7, 2023, 10:39pm UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/15 "2023-08-07T22:39:12Z")
Hi @Alexis Is this release still planned for this week please? Thanks! ---
**Author:** ![Alexis](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/alexis/32/13248_2.png) [@Alexis](https://community.weweb.io/u/Alexis)\ **Post date:** [August 8, 2023, 7:29am UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/16 "2023-08-08T07:29:06Z")
We released it this morning! 🙂 ---
**Author:** ![stefank](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/stefank/32/4202_2.png) [@stefank](https://community.weweb.io/u/stefank)\ **Post date:** [October 30, 2023, 11:43am UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/17 "2023-10-30T11:43:28Z")
Hi @Alexis, how does that work? I had a Xano instance transfered to a client and reconfigured the Xano and Xano Auth plugin. All collections are still pointing to the old Xano server. Did I miss a step? ---
**Author:** ![Alexis](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/alexis/32/13248_2.png) [@Alexis](https://community.weweb.io/u/Alexis)\ **Post date:** [October 30, 2023, 12:38pm UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/18 "2023-10-30T12:38:03Z")
How do you know they are still pointing to the old one ? Do you see requests in the network using a wrong domain ? ---
**Author:** ![stefank](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/stefank/32/4202_2.png) [@stefank](https://community.weweb.io/u/stefank)\ **Post date:** [October 30, 2023, 1:15pm UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/19 "2023-10-30T13:15:34Z")
Sorry, error at my side. I looked at a wrong data set to check the changes and the collection configuration still shows the old server name. So I wrongly assumed it didn’t change. ![screenshot 2](https://us1.discourse-cdn.com/flex016/uploads/weweb/original/2X/e/e952fe2f9c921a4a1686ab95521fda54ec8e3a2b.jpeg) But the request goes out to the new instance. So everything works fine beside the confusing configuration URL. ---
**Author:** ![Alexis](https://sea2.discourse-cdn.com/flex016/user_avatar/community.weweb.io/alexis/32/13248_2.png) [@Alexis](https://community.weweb.io/u/Alexis)\ **Post date:** [October 30, 2023, 1:16pm UTC](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507/20 "2023-10-30T13:16:43Z")
No worry, its a display bug we have we will fix it, thanks for reporting it 🙂 [Next page](https://community.weweb.io/t/update-endpoint-url-after-adding-xano-custom-domain/2507.md?page=2)